- Instructions
- About PsychoScenario.com
- FAQ
- Warranty
Downloadable Instructions ( Download )
Mounting Instructions for the PsychoScenario paintball mask
1. Before mounting your PsychoScenario mask to your goggle system it is important that you first thoroughly clean your goggle system to ensure that it is free of dirt, grease, and paint.
2. Test fit your PsychoScenario mask on your goggle system and check for proper alignment of eye openings and attachment points. Note where the Velcro tabs will attach to the goggle system. (NOTE: Do not expose the adhesive backing on the Velcro yet.)
3. Remove the mask from the goggle system. Using isopropyl alcohol (rubbing alcohol), swab all points where Velcro tabs will attach to the goggle system and allow it to dry. (NOTE: Do not use alcohol to clean either your lense or your PsychoScenario mask.)
4. Refit the PsychoScenario mask into position. Starting with the left temple of the mask, expose the adhesive backing on the Velcro tab. Do not peel the backing off of any other tabs yet. Carefully place the mask into position. Using even pressure, press the Velcro down until it stays in place. Repeat this process on the right side. (NOTE: Before pressing the Velcro tabs into position, ensure that the mask is placed properly on the goggle system.)
5. Work around the mask, placing the Velcro tabs one at a time. The mask should fit your goggle system relatively tight. Additional Velcro tabs are supplied for any additional points you wish to secure. Also, it is okay to trim your PsychoScenario mask slightly if you feel it is necessary, although any need of this kind should be minimal.
Caring for your PsychoScenario mask
Your PsychoScenario mask can be easily removed to clean or can be cleaned while on the goggle system. If you are going to remove it from the goggle system, be careful to separate only the hook from the loop portion of the Velcro and not both parts from either the PsychoScenario mask or from the goggle system. When cleaning your PsychoScenario mask, use only cold water. Do not use soap or cleaning products, as this may result in damage to the mask’s finish. Whenever possible your PsychoScenario mask should be stored on your goggle system. If you must store it separately, fold the mask Fold as shown and store flat.
Avoid stacking anything on top of the mask as this could potentially distort it. Store your mask in a cool, dry place. Always avoid storing your mask in extreme cold or heat.
If problems occur with the Velcro tabs coming off either the mask or the goggle system, one or two drops of Super Glue can be used to reattach the tabs. Also, additional tabs have been included and can be used as replacements if necessary.
Irregularities and Return policy
Since each PsychoScenario mask is a custom, hand-made product, there may be present small flaws in the latex or color irregularities from one mask to the next. These are completely normal and do not effect the quality of the mask itself.
PsychoScenario guarantees the highest possible quality control in the making of our masks. If you are unsatisfied with any of our products, for whatever reason, simply return it to us for a full refund (less the cost of shipping) within 30 days from the date of purchase. If you have a problem, please contact us and we will either repair it or replace it with a like item. You only pay for the shipping.
Thank you for your business,
Marc Tolbert
PsychoScenario.com
Mounting Instructions for the PsychoScenario paintball mask
1. Before mounting your PsychoScenario mask to your goggle system it is important that you first thoroughly clean your goggle system to ensure that it is free of dirt, grease, and paint.
2. Test fit your PsychoScenario mask on your goggle system and check for proper alignment of eye openings and attachment points. Note where the Velcro tabs will attach to the goggle system. (NOTE: Do not expose the adhesive backing on the Velcro yet.)
3. Remove the mask from the goggle system. Using isopropyl alcohol (rubbing alcohol), swab all points where Velcro tabs will attach to the goggle system and allow it to dry. (NOTE: Do not use alcohol to clean either your lense or your PsychoScenario mask.)
4. Refit the PsychoScenario mask into position. Starting with the left temple of the mask, expose the adhesive backing on the Velcro tab. Do not peel the backing off of any other tabs yet. Carefully place the mask into position. Using even pressure, press the Velcro down until it stays in place. Repeat this process on the right side. (NOTE: Before pressing the Velcro tabs into position, ensure that the mask is placed properly on the goggle system.)
5. Work around the mask, placing the Velcro tabs one at a time. The mask should fit your goggle system relatively tight. Additional Velcro tabs are supplied for any additional points you wish to secure. Also, it is okay to trim your PsychoScenario mask slightly if you feel it is necessary, although any need of this kind should be minimal.
Caring for your PsychoScenario mask
Your PsychoScenario mask can be easily removed to clean or can be cleaned while on the goggle system. If you are going to remove it from the goggle system, be careful to separate only the hook from the loop portion of the Velcro and not both parts from either the PsychoScenario mask or from the goggle system. When cleaning your PsychoScenario mask, use only cold water. Do not use soap or cleaning products, as this may result in damage to the mask’s finish. Whenever possible your PsychoScenario mask should be stored on your goggle system. If you must store it separately, fold the mask Fold as shown and store flat.
Avoid stacking anything on top of the mask as this could potentially distort it. Store your mask in a cool, dry place. Always avoid storing your mask in extreme cold or heat.
If problems occur with the Velcro tabs coming off either the mask or the goggle system, one or two drops of Super Glue can be used to reattach the tabs. Also, additional tabs have been included and can be used as replacements if necessary.
Irregularities and Return policy
Since each PsychoScenario mask is a custom, hand-made product, there may be present small flaws in the latex or color irregularities from one mask to the next. These are completely normal and do not effect the quality of the mask itself.
PsychoScenario guarantees the highest possible quality control in the making of our masks. If you are unsatisfied with any of our products, for whatever reason, simply return it to us for a full refund (less the cost of shipping) within 30 days from the date of purchase. If you have a problem, please contact us and we will either repair it or replace it with a like item. You only pay for the shipping.
Thank you for your business,
Marc Tolbert
PsychoScenario.com
PsychoScenario began in 2004 and has been growing ever since. What began as an experiment by the owner has grown into a truly unique company and a leader in paintball and airsoft mask modification. PsychoScenario masks embody the spirit of paintball with edgy designs that do not force the consumer to sacrifice safety or performance. Buy the best- Buy Psycho?
PsychoScenario.com? Changing the Face of Paintball!
Thank you for your business,
Marc Tolbert
Owner
PsychoScenario.com
What are these masks made of?
All PsychoScenario mask covers are made of high-quality, hypo-allergenic latex rubber. This material allows our masks to be flexible enough to fit a wide variety of goggles and gives “bounce” to your headgear.
Are they tough enough to stand up to paintball and airsoft?
Absolutely. These mask covers are made specifically for paintball and airsoft applications. They will not tear.
How do they attach?
Our masks attach to your goggles with industrial strength Velcro tabs. They are included with your mask and complete installation instructions are available in a downloadable PDF on the Instructions Page.
Can you make me a custom mask?
No. The process is far to lengthy to do on smaller scales.
Will it fit on my goggles?
PsychoScenario mask covers fit almost all paintball goggles on the market today. We also offer a 30 day money-back guarantee just in case.
It almost fits my goggles. Can I trim it?
Yes, all PsychoScenario mask covers are fully “trimmable”. Depending on your goggles you may need to trim the eyes or venting back in order to insure a proper fit. This can be done easily with common scissors and will not void the 30 day guarantee.
All PsychoScenario mask covers are made of high-quality, hypo-allergenic latex rubber. This material allows our masks to be flexible enough to fit a wide variety of goggles and gives “bounce” to your headgear.
Are they tough enough to stand up to paintball and airsoft?
Absolutely. These mask covers are made specifically for paintball and airsoft applications. They will not tear.
How do they attach?
Our masks attach to your goggles with industrial strength Velcro tabs. They are included with your mask and complete installation instructions are available in a downloadable PDF on the Instructions Page.
Can you make me a custom mask?
No. The process is far to lengthy to do on smaller scales.
Will it fit on my goggles?
PsychoScenario mask covers fit almost all paintball goggles on the market today. We also offer a 30 day money-back guarantee just in case.
It almost fits my goggles. Can I trim it?
Yes, all PsychoScenario mask covers are fully “trimmable”. Depending on your goggles you may need to trim the eyes or venting back in order to insure a proper fit. This can be done easily with common scissors and will not void the 30 day guarantee.
All PsychoScenario masks come with a full 30 day warrantee. If your product is damaged during shipping, installation or first-time use, then we will refund your money or send you a replacement item at no cost to you.
Thank you for your business,
Marc Tolbert
PsychoScenario.com
Thank you for your business,
Marc Tolbert
PsychoScenario.com
Product Categories
Featured Products
Reaper - Full
$44.95
|
Vapor Mask
$44.95
|